Insulated metal panels featured in Metal Construction News'
April 2017 issue.
Green Span Profiles
Green Span Profiles' RidgeLine 2 3/8-inch-tall mechanically seamed
metal roof panels slide together without rolling or lifting to
engage side-laps. The panels feature shoulder fasteners to prevent
over-driving, continuous weathertight seal at the side-laps and
factory-applied sealant in the batten caps. RidgeLine panels may be
used on slopes as low as 1/2:12. They are available 2.5, 3, 4 or 5
inches thick. They provide R-8 per inch of insulation thickness;
2.5-inch panels have R-20 per inch of insulation thickness.
Metl-Span's CF Tuff-Cast insulated metal panels (IMP) for walls
simulate finished precast concrete. They have foamed-in-place cores
that provide thermal performance. Tuff-Cast IMPs are available in
multiple widths, lengths and thicknesses to 6 feet. The
single-component panels' exterior textured surface is a
factory-applied, hard aggregated fiber reinforced polymer coating
called Tuff Cote. Tuff Cote finish is resistant to impact and
Southern Aluminum Finishing Co. Inc.
Southern Aluminum Finishing's Insul SAF M5000 Insulated Spandrel
Pans are designed for saving energy in opaque glazing areas of
exterior building envelopes. The galvanized steel wall panels have
mineral wool secured by resistance-welded pins. The panels are
attached to cladding framework with standard mechanical fasteners.
Mineral wool insulation in the spandrel pans can withstand
temperatures more than 2,000 F, is moisture resistant, provides
acoustical noise damping and qualifies for LEED credits. Insul SAF
M5000 Insulated Spandrel Pans can fit openings with various shapes
All Weather Insulated Panels
All Weather Insulated Panels' AdobeTexture wall panels integrate a
stucco look and texture into insulated wall panels. Matching
AdobeTexture trim and finishing system can create a continuous
look. AdobeTexture wall panels arrive on-site in one piece for
one-step installation. They have a 25-year limited paint warranty
against chalking, fading and loss of adhesion.
ATAS International Inc.
ATAS International's Isoleren insulated metal panels (IMP) are
lightweight and available in a variety of profiles, colors and
finishes. The IMPs are installed as a single element and complement
all ATAS International products.
© 1994-2017 Modern Trade Communications Inc.
No data on this website may be downloaded or copied for use on other websites or in other publications without prior written consent from this site’s webmaster. Violators will be prosecuted.