Metal Architecture Home

Coil Coatings

Coil Coatings - October 2014

Coil coating products featured in Metal Architecture's October 2014 issue.

Arkema's Kynar Aquatec CRX latex is an aqueous 2K system a water-borne polymer dispersion for producing weatherable, water-borne, air-dry paints and coatings based on Kynar PVDF resins with low levels of volatile organic compounds.

 

Arkema Inc.

Arkema's Kynar Aquatec CRX latex is an aqueous 2K system a water-borne polymer dispersion for producing weatherable, water-borne, air-dry paints and coatings based on Kynar PVDF resins with low levels of volatile organic compounds. While many coating properties, including weathering resistance, are obtained from the Kynar resin, other enhancements including early hardness, solvent resistance and adhesion are obtained by modifications to the acrylic component of Kynar Aquatec CRX latex. The coating is designed for high-performance original equipment manufacturer applications where weather resistance, scratch resistance and resistance to organic solvents are required.

www.arkema.com

 

Becker Specialty's BeckryTex is a textured paint system for exterior parts including roofing, wall panels, sidewalls, rollformed and stamped products.

 

Becker Specialty

Becker Specialty's BeckryTex is a textured paint system for exterior parts including roofing, wall panels, sidewalls, rollformed and stamped products. BeckryTex has performance attributes comparable to silicone modified polyesters and is warranted for 40 years adhesion and 25 years for chalk and fade. PolyTex, for interior and exterior parts including rollformed products and stamped products, can be warranted up to 10 years.

www.beckers-group.com

 

LumaTread is a lightweight, flexible tread plate that may be customized.

 

CENTRIA

LumaTread is a lightweight, flexible tread plate that may be customized. It is available in two options: LumaTread Brite with one-side bright aluminum and LumaTread Color, available in several standard colors and custom colors. LumaTread is available in various gauges and widths, is 100 percent recyclable and applications include: architectural (interior and exterior), transportation (trailers and RVs), tradeshow booths and displays, signage and toolboxes.

www.rollwithcentria.com

 

Dura Coat Products' Durapon 70 is a PVDF coating used with Dura Coat's thick film primer in coastal and heavy industrial environments.

 

Dura Coat Products

Dura Coat Products' Durapon 70 is a PVDF coating used with Dura Coat's thick film primer in coastal and heavy industrial environments. Combined with Edge Seal, a clear coating applied at the job site to seal the cut edges of metal panels, the continuity of the finish is maintained. Edge Seal can also be used periodically as part of routine maintenance to resist corrosion.

www.duracoatproducts.com

 

Englert's coating line painting coil is produced with high-grade steel and aluminum.

 

Englert Inc.

Englert's coating line painting coil is produced with high-grade steel and aluminum. Englert coats, slits and stamps products in-house and provides toll coating and color matching for a range of industries including residential and nonresidential building products.

www.englertinc.com

 

PPG Industries' Duranar graffiti-resistant (GR) and Coraflon GR coatings feature a clear barrier over the pigmented color layer of the coating.

 

PPG Industries

PPG Industries' Duranar graffiti-resistant (GR) and Coraflon GR coatings feature a clear barrier over the pigmented color layer of the coating. If the coating is spray-painted or otherwise marred, it can be cleaned by applying DuraPrep 400 graffiti remover. After the solution dwells on the stain for 10 to 60 seconds, it can be wiped with a clean cloth or scrubbed with a nylon brush. Most stains can be removed in 10 minutes or less. Duranar GR coatings are available in a variety of low and medium glosses. Coraflon GR coatings are for high-gloss applications.

www.ppgideascapes.com

 

Valspar's Kameleon coating is a multicolored system that uses mica flakes to create a consistent, iridescent gradient look.

 

Valspar

Valspar's Kameleon coating is a multicolored system that uses mica flakes to create a consistent, iridescent gradient look. Kameloen coating is applied in a three-coat system: a primer, basecoat and color coat. Unlike metal flakes used in metallic paints, mica flakes do not contain an electrostatic charge that can cause flakes to follow the back-and-forth movements of application equipment, resulting in an uneven dispersion of color. Kameleon Colors offer the same advanced protection of Valspar's 70-percent PVDF Fluropon product family in pearlescent colors that appear to shift in color when viewed from different angles or sunlight.

www.valsparcoilextrusion.com/kameleon