Metal Architecture Home

Metal Wall Panels

Insulated Metal Panels - December 2015

Insulated metal panels featured in Metal Architecture's December 2015 issue.

All Weather Insulated Panels

 

All Weather Insulated Panels

All Weather Insulated Panels' AdobeTexture wall panels integrate a stucco look and texture into insulated wall panels. Matching AdobeTexture trim and finishing system may be utilized to create a continuous look. AdobeTexture wall panels arrive on-site in one piece for one-step installation. They have a 25-year limited paint warranty against chalking, fading and loss of adhesion.

www.awipanels.com

 

ATAS International Inc.

 

ATAS International Inc.

ATAS International's Isoleren insulated metal panels (IMP) are lightweight and available in a variety of profiles, colors and finishes. The IMPs are installed as a single element and are designed to complement all ATAS International products.

www.atas.com/isoleren

 

Green Span Profiles

 

Green Span Profiles

Green Span Profiles' RidgeLine metal roof panel utilizes a T-shaped standing seam that eliminates the need to lift or roll panels into place. RidgeLine features a batten cap that comes with pre-applied mastic, eliminating the need for field-applied tape seals. It has a polyisocyanurate foam core that yields an R-value of 8 per inch. The metal roof panels are available in 2 1/2-, 3-, 4- and 5-inch thicknesses.

www.greenspanprofiles.com/ products_ridgeline.html

 

Kingspan Insulated Panels Inc.

 

Kingspan Insulated Panels Inc.

Kingspan Insulated Panels' Optimo Embossed insulated metal panels (IMP) have reveals of 1/8-inch in vertical application, 3/8-inch in horizontal application, and optional 1-inch to 6-inch horizontal application. Its R-values by ASTM C518 are 7.2 per inch at 75 F and 8 per inch at 35 F. Optimo Embossed IMP's exterior face is 22-gauge embossed profiled G-90 galvanized or Galvalume pre-painted steel. The interior face is 22-, 24- or 26-gauge embossed or non-embossed steel, AZ50 Galvalume or G-90 galvanized (20-gauge available per request).

www.kingspanpanels.us

 

Laminators Inc.

 

Laminators Inc.

Laminators' Omega Foam-Ply panels feature an insulating foam core sandwiched between two layers of exterior-grade hard-board and finished aluminum sheets. They have an overall panel thickness of 5/8 inches to 3 1/2 inches, and 1 inch thick is typical. Omega Foam-Ply panels are available in a variety of colors and two surface finishes. Applications include storefronts, infill panels, opaque glazing, spandrels and sunrooms.

www.laminatorsinc.com

 

Mapes Panels LLC

 

Mapes Panels LLC

Mapes Panels' spandrel glass-faced MapeSpan panels are designed with the aesthetics of a glass exterior and higher R-values. They utilize a 1/4- inch piece of spandrel glass with colored frit on a #2 surface as the exterior component. MapeSpan panels feature an insulated core and customizable interior. They are available with clear or tinted glass, and all of Mapes' standard or custom finish options on the interior with R-values to 27.7.

www.mapespanels.com/mapespan

 

MBCI

 

MBCI

MBCI's eco-FICIENT Summit wall panels feature a stucco-embossed light mesa profile. An exterior skin is profiled with minor striations that give the panels a flat appearance and linear look while blending with panel side joints. Eco-FICIENT Summit wall panels have an interior skin with a stucco-embossed light Mesa profile and a variety of coating options are available.

www.mbci.com

 

Metl-Span

 

Metl-Span

Metl-Span's CFR insulated metal standing seam roof panels are installed from the top side with concealed clips and fasteners placed in the side joint. It features a mechanically closed single lock standing seam at the exterior side joint. The interior side joint is a single tongue-and-groove interlock. CFR panels' exterior profile has a 2-inch standing seam with the Mesa profile between the seams. The interior Mesa profile is 1/8-inch-deep.

www.metlspan.com