Metal Architecture Home

Insulation Systems and Vapor Retarders

Insulation Systems - November 2016

Insulation systems featured in Metal Architecture's November 2016 issue.

Covertech Fabricating Inc.

Covertech Fabricating Inc.

Covertech Fabricating's rFoil Reflective Insulation is available in a wide variety of facing colors including custom colors. RFoil Reflective Insulation is produced with a thin material that reflects 96 percent of radiant heat from its surface. The insulation system is designed to control heat gain or loss and prevent interior condensation in metal buildings and metal-clad buildings.

www.rfoil.com

GAF North America

GAF North America

GAF North America's ThermaCal Exterior Wall Insulation Panels eliminate thermal bridging by covering the studs and adding continuous insulation to the rest of a wall. The panels minimize heat loss with a tongue-and-groove design, attach to structural exterior sidewalls and can be fastened to outside metal, wall sheathing and masonry walls. ThermaCal Exterior Wall Insulation Panels are constructed with cut-back sheathing designed for precision fit and clearance for sheathing expansion.

www.gaf.com

Dow Corning

Dow Corning

Dow Corning's HPI-1000 Building Insulation Blanket is a thin, flexible insulation that can be cut and conformed to complex shapes and tight curvatures. It adheres tightly to connection points in building envelopes. The insulation blanket can be used as a thermal shim or spacer and used to provide a thermal barrier between highly conductive elements.

www.dowcorning.com

Owens Corning

Owens Corning

CavityComplete Wall System for steel stud with masonry veneer is a warranted assembly with components from five companies. The masonry cavity wall system is designed to provide thermal efficiency, continuous insulation, air and water management, vapor resistance and brick ties. Components were tested together to produce systemized codes and standards compliance data.

www.cavitycomplete.com

Therm-All Inc.

Therm-All Inc.

Therm-All's High-R Banding System is a High-R application for metal building roofs. It is designed to meet filled cavity system specification requirements and most energy codes. High-R Banding System is also designed to facilitate electrical, heating, ventilation, air conditioning and sprinkler system installation.

www.therm-all.com/high-R-banding.php