Metal Architecture Home

Metal Roofing

Metal Soffit Panels - December 2014

Metal Soffit Panels featured in Metal Architecture's December 2014 issue.

Englert's MetalMan HT Underlayment for metal roofing is a high-temperature, self-sealing, high tensile strength, 60-mil underlayment that features a black, non-woven polyester topside.

 

Englert Inc.

Englert's E-375 Commercial/Residential Soffit Panel in solid or vented styles features a 3/8-inch Deep V-Groove, unobtrusive seams with a positive lock and concealed fasteners. E-375 Commercial/Residential Soffit Panels provide a net-free ventilation area of 10.12 square inches per square foot.

www.englertinc.com

 

MBCI's FlexLoc is a non-structural panel for curved applications and soffits. It is available in a variety of widths including 8 1/2, 9 1/2 and 10 1/2 inches, and is recommended for barrel vaults with smooth looks and horizontal lines.

 

MBCI

MBCI's FlexLoc is a non-structural panel for curved applications and soffits. It is available in a variety of widths including 8 1/2, 9 1/2 and 10 1/2 inches, and is recommended for barrel vaults with smooth looks and horizontal lines. FlexLoc is clipped down to a waterproofed solid substrate, eliminating panel penetrations and exposed fasteners, and because the panels are generally installed parallel to the curved surface, no pre-curving is required.

www.mbci.com

 

McElroy Metal offers four metal soffit panels: the FW Series, a 1 1/2-inch deep flush metal panel for vertical and horizontal applications; the Matrix soffit system, available in a variety of gauges and Kynar 500 colors; and the Marquee family, which consists of two panels, Marquee-Lok and Marquee II.

 

McElroy Metal

McElroy Metal offers four metal soffit panels: the FW Series, a 1 1/2-inch deep flush metal panel for vertical and horizontal applications; the Matrix soffit system, available in a variety of gauges and Kynar 500 colors; and the Marquee family, which consists of two panels, Marquee-Lok and Marquee II. Marquee-Lok and Marquee II can be used as a soffitt and fascia panel, and Marquee-Lok has the added capability to be used as a wall panel.

www.mcelroymetal.com

 

Petersen Aluminum offers PAC-750/850 Soffit Panels and Flush Panels; both pre-formed profiles may be used in soffit applications and are available in a variety of gauges and widths.

 

Petersen Aluminum Corp.

Petersen Aluminum offers PAC-750/850 Soffit Panels and Flush Panels; both pre-formed profiles may be used in soffit applications and are available in a variety of gauges and widths. PAC-750 and PAC-850 panels are rollformed of 0.032-aluminum to lengths up to 25 feet and are 12 inches wide with a V-groove every 6 inches center-to-center. Flush Panels are rollformed from 0.032- or 0.04-aluminum, 24- and 22-gauge galvanized steel and are tensionleveled to ensure flatness.

www.pac-clad.com

 

Umicore Building Products USA offers VMZ Interlocking panels and VMZ Metafor panels for soffits.

 

Umicore Building Products USA Inc.

Umicore Building Products USA offers VMZ Interlocking panels and VMZ Metafor panels for soffits. Metafor panels interlock together and sit inside the J-channels attached on both sides of the building's framework where the soffit is located. VMZ Interlocking and VMZ Metafor perforated panels allow free flow of ventilation throughout the soffit.

www.vmzinc-us.com