Creative Designs

by Jonathan McGaha | December 4, 2011 12:00 am

By Administrator

Walk around any major city and you would be hard pressed not to find metal integrated into many of the buildings that you pass. From metal wall panels to roof panels, from soffits to column covers, metal plays a role in the design of many buildings that we pass each day. And there are many reasons to use metal as a part of a building façade. From its sustainability to its ability to reduce heat gain, metal has been used to create some very different and unique building façades. From a city hall to a college residence hall, Metal Architecture takes a look at some of the more unique metal building façades we could find.

 

Creative-Chandler City Hall

Chandler City Hall, Chandler, Ariz.

Two sides of the city hall feature 2,500 perforated metal panels that are so close together they seem connected, almost like small pixels on a computer monitor. The brain child of Ned Kahn, a north California artist known for replicating the forms and forces of nature, the graphical “building” art-called Turbulent Shade-was created by 6-by-21-inch stainless steel panels designed to swing with the desert wind gusts.

The wave-like metal art applied to this five-story government building unites Kahn’s artistry and the vision of the architecture and engineering firm, SmithGroup, Phoenix, combined with the skills of KT Fabrications, Chandler, and a decorative metal from Tampa, Fla.-based McNICHOLS Designer Metal Collection.

The 18-gauge designer stainless steel panels have a 1/16-inch hole that is 1/8-inch center staggered creating 23 percent open area, screening 76 percent of the light. Each perforated metal panel has two grommet rings attached to a stainless steel bar with two metal cylinder arms, allow

ing the panel to float as it sits approximately 30 inches from the building’s glass curtainwall system. The design allows the panels to behave independently, rocking vertically as they catch the wind currents from the surrounding Sonoran Desert.

“It’s amazing that an art piece can provide shading and reduce heat gain, making a high impact statement about the community’s commitment to sustainability with a tangible connection to the environment,” says Mark Roddy, AIA, design principal at SmithGroup.

The City of Chandler City Hall building envelope design serves multiple purposes, especially heat control.

SmithGroup worked for many years to create this sustainable and regionally responsive architecture, says Roddy. “So many office buildings look the same. We wanted our building to be didactic, for people to see in the architecture how the design responds to the strong environmental constraints of the desert’s heat and sun.”

With summer temperatures exceeding 100 F, abundance of glass and orientation of the building, shading was a challenge, Roddy says. The long façades on the north and south sides are easier to control heat and glare, but the low angle sun from the east and west was almost impossible to deal with. “With any curtainwall, you have to control the sun, which was at the heart of creating a scrim wall using metal.”

With the assistance of the city of Chandler Art Commission, which provided the art budget, Kahn was appointed to produce a façade that would be part of the building. “We challenged him to create a shade that you can see through,” says Roddy.

Early in the collaboration, Kahn explored the idea of creating pixels in a large-scale piece. When the sketches and models were made and accepted by the commission, the team looked to KT Fabrication to handle to production and installation and McNICHOLS to provide the perforated panels.

Adding to the character are low-energy LED lights that are strategically placed at the top and bottom, casting various colors onto the moving panels or “pixels.” When lit, the scrim wall becomes a “moving” canvas that obscures the view of the office interiors after dark.

SmithGroup lighting designer Jeff Gerwing selected blue and amber to represent the water and earth of the landscape. With blue at the top and amber at the bottom, the two colors merge creating a white light in the middle. “When the pixels move, they swing in and catch amber light, and when they swing out, it looks blue,” Roddy says, describing the effect.

By day, the 4,300 square feet of “moving” perforated metal allows office workers to see out, while obscuring a view of the interior from the street and providing a sun shade.

 

Creative-Gantt Center

Harvey B. Gantt Center for African American Arts and Culture, Charlotte, N.C.

Jacob’s Ladder and African American quilts provided the inspiration and vision for this building’s design. To invoke the illusion of a quilt, the winding articulation of the ladder and the building’s façade is draped in various textures and patterns. Designed by The Freelon Group, Durham, N.C., the architects studied how various building materials that could architecturally mimic quilting fabrics while contributing to a functional façade and ultimately turned to perforated metal panels from Lancaster, Pa.-based Fabral to get the job done.

“In the end, the perforated metal allows just enough transparency for light to filter to the layer of metal behind it creating softness out of a hard material. The partial visibility of the vertical girts behind the panels, overlaps at seams, and lines of exposed fasteners reinforce the notion of quilt as façade,” explains Kevin M. Turner, AIA, LEED AP, associate principal with Freelon.

Opened in October 2009, the 45,940-square-foot, four-story museum was known for more than 30 years as the Afro-American Cultural Center. Center officials wanted to expand the museum to include more exhibits representing a range of art, as well as additional cultural events, classes and community outreach programs. What they found was a narrow plot of land-60 feet wide and 400 feet long-in downtown Charlotte. The center, named after former Charlotte Mayor Harvey B. Gantt, is part of a mixed-use development that aims to revive the downtown area, known as Brooklyn, which once was a vibrant African American neighborhood that has been replaced by urban renewal.

The concepts of Jacob’s Ladder and quilting were born from the center’s location in Brooklyn and its mission-“to present, preserve and promote African American art, culture and history for the education and enlightenment of all.” The architects and center director wanted the Gantt Center to incorporate Brooklyn’s heritage, with the neighborhood inspiring the Jacob’s Ladder concept. The Myers School, which was once situated near the center, had prominent fire escapes flanking the building, leading to the school’s nickname of “Jacob’s Ladder.” Freelon created Jacob’s Ladder-a symbol of hope, enlightenment and advancement-on the south façade of the center with the use of the circulation of elements and the articulation of a central atrium.

Draped over the building’s edge on the south façade is the other design concept-quilts. Quilting’s historical significance comes from tales that explain that a safe house, during the time of the Underground Railroad, was designated when a quilt depicting a log cabin with a black center for the chimney was hung in a house’s window. Also, the path of the Underground Railroad was said to be indicated by quilts with variations of Jacob’s Ladder. Freelon used the quilting pattern for Jacob’s Ladder as a generative device for the design of the building’s skin and also examined quilts in the center’s collection for inspiration.

The “fabric” of the quilt is made up of approximately 30,000 square feet of Hefti-Rib perforated metal panels from Fabral. The 0.040-aluminum coils were coated in two custom shades of Copper color with a Flurobond high-definition coating finish from Minneapolis-based Valspar. The painted coil material was perforated with 3/8-inch diameter holes in half the coil and 1/4-inch diameter holes for the remainder. The coil was then roll formed into the Hefti-Rib profile and was distributed by Architectural Products Specialist Inc., Loganville, Ga.

Because the perforated panels are an architectural feature, Freelon had to address making the building watertight. Turner explains: “We started with a basic rainscreen assembly and added an additional layer of metal behind the cladding to act as a drainage plane and to protect the insulation and weather barrier from UV and direct exposure to the elements. All of the elements of the assembly had to be constructed in a way that did not allow the fasteners to compromise the weather barrier.”

Batson-Cook Construction, West Point, Ga.; H.J. Russell & Co., Atlanta; and R.J. Leeper Construction LLC, Charlotte, were the general contractors.

 

Creative-Park Hotel Hyderabad

 

[SOM | © Bharath Ramamrutham]

Park Hotel Hyderabad, Hyderabad, India

A perforated aluminum screen provides sun shading and privacy for guests, in addition to views of the city, at this LEED Gold certified hotel designed by Skidmore, Owings & Merrill, New York. Infusing a modern and sustainable design with local craft traditions, the 531,550-square-foot, 270-room hotel is influenced by the region’s reputation as a center for the design and production of gemstones and textiles.

Special attention was paid to the building’s relationship to its site, daylighting and views, in addition to a number of sustainable design trends. Three of the building’s sides wrap around an elevated central courtyard that can be accessed from the hotel lobby, and which serves as an extension of the restaurants inside, and features a private dining court and swimming pool that is protected from strong winds.

The nine-story hotel’s unique perforated metal exterior provides a range of transparency, and was inspired by the forms of the metalwork of the crown jewels of the Nizam, the city’s historic ruling dynasty. The perforated and embossed metal screens over a high-performance glazing system give privacy to the hotel rooms, while allowing diffused daylight to enter the interior spaces that reflect traditions of patterning, craftsmanship and style, all while providing acoustic insulation from nearby trains.

Shenzhen, China-based China Southern Glass supplied the custom unitized curtainwall system with high-performance acoustic glass, and Mitsubishi Plastics Inc., Tokyo, supplied 4-mm-thick ALPOLIC aluminum composite spandrel panels. The curtainwall system, including the custom aluminum screen, was manufactured, assembled and installed by Permasteelisa, Treviso, Italy, was fabricated in the Thailand factory and assembled in the Bangalore, India, facility. The hotel features more than 139,935 square feet of 3-mm-thick outboard, custom embossed and cutout aluminum screens supported by the curtainwall with small aluminum connector arms. The screen panels were fabricated and finished in Permasteelisa’s Thailand facility and shipped to the project site.

Completed in 2010, this low-energy prototype building has reduced its energy use by 20 percent through collaboration with manufacturers, fabricators and researchers.

Creative-Seven Clans

Photo by Steven Bergerson, Bergerson Photography, of Minneapolis

Seven Clans Casinos Red Lake, Red Lake, Minn.

 

Following the wishes of community elders of the Red Lake Band of Chippewa Indians, the owners and operators of this casino-hotel complex located on the reservations’ southern edge, the architectural design respects tribal heritage, but also exudes an atmosphere of fun and relaxation.

DSGW Architects, Duluth, Minn., accomplished both goals by designing the overall casino complex to resemble a traditional tribal “longhouse”-or gathering place-while incorporating contemporary building materials such as Alucobond aluminum composite material by 3A Composites USA Inc., Mooresville, N.C., and a sophisticated color-changing LED exterior lighting system.

“They wanted to create a first-class facility that had a north woods flavor with contemporary elements in order to improve their gaming image,” according to Erik C. Wedge, AIA, NCARB, LEED AP, partner, DSGW Architects, who said the new casino was designed to replace the gaming facility that had been incorporated into the Red Lake Humanities Center.

The $21 million, 65,840-square-foot complex was designed to celebrate the area’s woodlands culture in which the lake itself plays a major role. So, not only did Wedge incorporate wood and stone in the building design but rippling images of the shimmering blue lake.

Wedge recreated the water effect of Red Lake in the casino’s exterior cladding with an intricate pattern of hourglass shapes formed with 3,250 square feet of 4-mm-thick Alucobond ACM in Spectra Ocean.

“The Alucobond Spectra is a very eye-catching material that could be shaped into a form that appears to undulate,” says Wedge. “Different colors are viewed from different angles. The color scheme ranges from blue to green. It really does seem to shimmer like the lake. We couldn’t have gotten this effect from any other product on the market. We wanted to recreate the shimmer of the lake on a bright, sunny day.”

At night, the Spectra Ocean exterior panels produce a unique, eye-catching effect when bathed in a state-of-the-art LED lighting system that changes colors.

“With the material’s reflective qualities and the design of the panels, you get the impression of the moon shimmering off of the lake at night,” says Raymond J. Brenny, chief operating officer, Red Lake Gaming. “There’s no other casino or business in this area like it. The Alucobond is well made and the installation looks outstanding. The wave pattern creates a very unique appearance.”

Atomic Architectural Sheet Metal Inc., Vadnais Heights, Minn., fabricated and installed the Alucobond Spectra material in a route and return wet-seal method, while Woodstone Buildings Inc., Minneapolis, was the general contractor, and EBP LLC, Excelsior, Minn., was the distributor.

Russ Schmitz, Atomic vice president of sales says that fabricating the Alucobond exterior panels into the compound radius hourglass shapes required a multi-step process. “The face of these panels has a compound radius as well as the sides; we heat welded-them together. An aluminum attachment system was fastened to the panels so we could create a running bond-type pattern.”

 

Creative-West Coast Univ

West Coast University, North Hollywood, Calif.

The new home to the school’s undergraduate and graduate nursing programs, the facility was orginally a JC Penney’s store with 150-foot-long by 37-foot-high walls on two sides. In addition to completing an extensive interior renovation, West Coast University wanted to renovate the building’s exterior to attract attention and add some curb appeal to the new facility. Placentia, Calif.-based The Carvist Corp., worked with Culver City, Calif.-based SAA Interiors and Architecture to design 6,000 square feet of 4-mm ALPOLIC Aluminum Composite Material in Bright Silver Metallic from Mitsubishi Plastics Composites America Inc., Chesapeake, Va., that gave the building some texture and when illuminated at night, an eye-catching result.

While the design originally called for bands of curved stainless steel running horizontally on the building, Carvist introduced a way of forming a curved unitized panel that they call the Wave Wall. They designed, fabricated and installed more than 1,200 individual panels attached to frames and mounted on the exterior walls to make the Wave Wall. Using the ACM panels lowered the cost from the original design budget and gave the owner what they were looking for in curb appeal.

Completed in January 2011, the facility entrance also boasts a skylight. Howard Building Corp., Los Angeles, was the general contractor.

 

Creative-Univ of Ariz

Photo credit: Mark Kempf, St. Louis

Sixth Street Residence Hall, University of Arizona, Tucson, Ariz.

The striking new residence hall features a dramatic application of Holland, Mich.-based Dri-Design’s new Ombrae Imaging Technology. Developed by artist and Hollywood set designer Roderick Quin, Ombrae uses an advanced computer software system to cut three-dimensional pixels into Dri-Design panels.

In addition to the five-story Ombrae-created visual that utilized 1,000 square feet of material, approximately 30,000 square feet of Dri-Design panels were installed in various applications on the multi-building complex. The applications included 10,000 square feet of Dri-Design perforated panels plus 20,000 square feet of traditional Dri-Design panels, installed by Progressive Roofing, Tucson. The 0.080-inch aluminum panels were finished in four colors: Copper Anodized, Garland Green, Aspen Meadow and Green Pear.

Named Arbol de la Vida, meaning tree of life, the residence hall complex’s design follows two visual themes. One is of an iconic Southwest slot canyon, which can be seen both through the complex’s shape as well as the canyon graphic that is prominently displayed on the building utilizing the Ombrae technology.

“NAC|Architecture was asked to provide an ‘unexpected moment’ at an important corner of the campus that would bring together the concept for this student residence hall project and also express an artistic vision for the University of Arizona,” says Ben de Rubertis, principal at Denver-based NAC|Architecture. “Artist Ingo Meckman generously provided imagery of a slot canyon, part of the heritage and iconography of the desert Southwest. Dri-Design contributed artisan-level detailing and technology as the three groups worked tightly in collaboration to provide an artistic expression for the building that could not have been achieved in any other way. The resulting brise-soleil is both appropriate to the desert climate, performing a crucial shading function for one of the important spaces in the building, and also providing a lifetime product that expresses the spirit and pride of place at the University of Arizona.”

Source URL: https://www.metalarchitecture.com/articles/creative-designs/