by Jonathan McGaha | January 26, 2011 12:00 am
Dri-Design panels help achieve many design goals for new patient-focused hospital
More than 136,000 square feet of Holland, Mich.-based Dri-Design panels clad the new Columbia St. Mary’s Hospital in Milwaukee, the state’s largest hospital construction project. The .080 aluminum panels were finished in Champagne and Bone White. The patented Dri-Design Wall Panel System is an affordable dry joint, pressure-equalized rainscreen system.
The Columbia St. Mary’s project is a significant piece of architecture in the urban fabric of Milwaukee due to its size and prominent location along the upper shores of Lake Michigan. The nine-story, $417 million project was designed by Hellmuth, Obata + Kassabaum (HOK), St. Louis. The hospital campus, located on 20 acres overlooking the lake, includes the core hospital of 670,000 square feet; a new 25,000 square feet cancer center; two medical office buildings; and three new parking structures.
“We wanted the building to work on several different scales,” according to David Buckley, HOK’s project designer. “The project anchors the north end of the city plus it sets in a beautiful neighborhood that welcomed commercial/institutional development compatible with the look of its surroundings. And, of course, we needed a design that was cohesive with the existing campus buildings.” The new hospital was built using the principles of Evidence-based Design (EBD), an emerging science that guides healthcare design to improve patient outcomes.
The hospital includes 312 patient beds (411 total on hospital campus) and three Specialty Institutes. Expansive windows, two-story family lounges and a grand atrium offer panoramic views of Lake Michigan, the historic Water Tower and the downtown skyline. Also located on the 22-acre campus are a Women’s Hospital (former Columbia St. Mary’s Hospital), Cancer Center and medical office buildings.
Since Buckley had not used the Dri-Design system before, he traveled to Denver to look at several Dri-Design projects before recommending the product for use on St. Mary’s, where it interfaces with precast concrete.
According to Buckley, “HOK is committed to sustainable design and on exterior wall systems, we’re very convinced by the rainscreen system. One of the goals was to make the entire exterior a rainscreen system. That was pretty simple with the Dri-Design
[system] but more of a challenge with the precast.”
Buckley said that a rainscreen system is particularly important in a healthcare environment because is prevents moisture from entering the wall cavity and thus prevents any opportunity for mold to grow.
The precast was applied three to five stories in order to relate to the scale of the neighborhood and the masonry that was used throughout.
“But we wanted the higher parts of the building to be light-colored because that’s what you see from the city and the metal panels look great against the blue skies that are common in the upper Midwest,” said Buckley.
In order to break down the scale of the elements further, the designers used datum line reveals on 2-foot increments that aligned through the precast and metal cladding.
Installation of the Dri-Design system was done by Architectural Products of Wausau, Wausau, Wis. “This may be the largest metal wall panel project using that type of product in Wisconsin,” according to John Schremp, president of APW. “The Dri-Design system was significantly less expensive, primarily due to the labor costs. We were able to cut the per-panel labor cost in half.”
HOK’s Buckley acknowledged the important role that APW played. “I appreciated the great cooperation with the installer,” Buckley said. “APW helped make the system more efficient and less costly. The owner was pleased with the relationship between architect and installer and was pleased with the cost, too. It was less than what we had been estimating for a composite panel.” The general contractors on the project were CG Schmidt, Milwaukee, and Barton Malow, Southfield, Mich., referred to as CG Schmidt-Barton Malow-A Joint Venture.
Dri-Design panels can be made from a variety of materials, including painted aluminum, zinc, copper and stainless steel, and are 100 percent recyclable. Panels are available in any Kynar color in both standard and custom sizes.
A Healthy Design
The principal architect, Hellmuth, Obata + Kassabaum (HOK) of St. Louis, incorporated five evidence-based design elements into the facility to create a patient-centered environment and to promote healing:
Access to Nature: 80 percent of the rooms have tremendous views of Lake Michigan. Two-story glass family lounges provide a relaxing environment as do views of the two rooftop gardens.
Patient Control: Individual room controls (lighting, temperature) which allow patients to customize their environment.
Social Support: Spacious, private rooms designed to accommodate overnight stays for a family member or friend.
Pleasant Diversions: Window sills were lowered to enable patients lying in a bed to enjoy the views of nature. Pleasing artwork, a Garden Café featuring made-to-order items, and healing gardens (open spring 2011) are available.
Stress Reduction: Special building materials, including noise-reducing ceiling tiles, absorb sound ensuring a quiet environment for patients.
Source URL: https://www.metalarchitecture.com/articles/dri-design-panels-jan-ma/
Copyright ©2026 Metal Architecture unless otherwise noted.