Innovative Irrigation

by Jonathan McGaha | October 31, 2011 12:00 am

By Administrator

irrigation2

The use of rainwater and rain catchment systems is increasing throughout the United States. The type and purpose of a rain catchment system varies depending on what an individual wishes to use the rainwater for, potable or non-potable use.

“The adoption of rainwater catchment as an alternative source of fresh water is a rapidly developing topic,” notes Bob Boulware, P.E., president of Indianapolis-based Design-Aire Engineering Inc. and president of the American Rainwater Catchment Systems Association. “[Recently] Atlanta became the first city to have a code that allows rainwater to be used for potable water. To date there are about 10 states that have proceeded to write regulations on the books permitting RWH because of the absence of national codes.” Unsurprisingly, these states include hot climates and areas that receive little rainfall, including Texas, Hawaii and Georgia. Codification is not exclusive to rainwater harvesting for potable water usage. In fact, the codification and official documentation of rainwater catchment rules and regulations has seen an upturn. Boulware recalls, “Up to this point rainwater catchment was not approved for public use … By the end of this year rainwater catchment will be approved to be part of the 2012 Uniform and International Plumbing codes for the first time. These codes determine the standards for non-potable use, which would include toilet flushing, landscape irrigation, process makeup and the like.”

irrigation

Catchment Considerations

“There are three reasons to consider rainwater harvesting: lack of water, poor water quality and concern for combined sewer overflows,” remarks Boulware. In addition, to Boulware’s noted considerations, homeowners may be attracted to rainware systems thanks to the many benefits rainwater provides.

For example, the owners of a residence in Weir, Texas took the irrigation benefits of non-potable rainwater into consideration when they brought in Mark Leatherman, owner and designer, Rain Harvest Resources, Libertyville, Texas, to design and install a rain catchment system.

In an area that receives an average rainfall of 32 inches and had experienced a significant drought, a rain catchment system was a wise choice. Installation began and finished quickly in mid-March with a total installation time of five days.

The catchment system itself uses simple forces such as gravity to propel the system. Water is collected off of a 1,702-square-foot galvanized metal roof. “Rainwater is collected from the roof through gutters and downspouts in a ‘collection line,’ which is buried and sends the water to the 10,000-gallon tank via gravity,” explains Leatherman. “The water is collected as needed through a centrifugal pump and pressure tank system to the garden and landscape.” The end result is an energy-efficient system that uses a renewable resource to irrigate surrounding landscape beds.

Rainware Meets Metal

Apart from the simplicity of Leatherman’s design, a key feature in the system is the PIONEER GALAXY XL08 tank produced by BlueScope Water USA, Austin, Texas, which can hold more than 9,000 gallons of rainwater. “Metal tanks are longer lasting and more durable than some other options,” Leatherman notes. “The metal tanks have a heavy liner in them and the liner combined with the reflectivity of the metal exterior effectively keeps the water temperature lower and more stable in our hot Texas sun.”

In addition to metal’s durability, Leatherman also cites metal’s fireproof properties and unique assembly features as benefits. “Most metal tanks are delivered to the site unassembled and put together on location which allows us to get larger tanks in more remote locations,” expounds Leatherman.

Rainware and Retrofit

“Most of the systems we install are retrofits simply because rainwater collection has not been designed into new construction for the past 50 years,” explains Leatherman. “From the turn of the century until the mid-1960s or so, everyone in rural Texas had a cistern of some sort because their water was collected from barn roofs, came from hand-dug wells, or came from a windmill and was stored in an above-ground tank.”

Beyond the arid Texas landscape, rainware retrofit is alive and well at a number of sites, including the famous Alcatraz Island in San Francisco. In fall 2009, the historic gardens of the island needed restoration. Previously water for the gardens was imported directly from San Francisco. To remedy the situation, John Russell of Oakland, Calif.-based design and landscape firm, WaterSprout, was called in to design a more sustainable solution.

Before installing his design on a site like Alcatraz, Russell recalls a number of design factors.

rain_catchment

“One of the challenges was the historic preservation of Alcatraz Island where they don’t want to impact any of the existing structures. [In addition], Alcatraz Island is a nesting habitat for a wide variety of birds, so we had to make sure that when we were putting in cisterns or any equipment that we weren’t affecting any of the nesting grounds.”

After considering the environmental factors and scheduling the installation time around nesting season, the system was installed so rainwater falling off of the historic cellblock building flows down through existing downspouts within the building’s interior. Russell and his team connected PVC schedule 80 piping to the main base of the building where the rainwater flows into a first flush diverter that diverts about 30 to 40 gallons of water into sand filters.

Russell explains, “The sand filter is a biological filter-bacteria living in the sand removes all of the pathogens from the water. The water then goes into one of two storage tanks, the first being the historic grey water cisterns where we installed rainwater tanks. The overflow goes to a secondary storage system with a total combined storage of 15,000 gallons.”

Half of the rainwater cisterns are recycled polyethylene plastic tanks manufactured by Sherman Oaks, Calif.-based EcoRain, with the cisterns attached to hoses used by garden maintenance volunteers. The hoses disperse the rainwater through gravity allowing volunteers to maintain the historic integrity of the site’s gardens.

Looking to the Future

Increasing freshwater demands are driving the industry demand for potable rain catchment solutions. As Boulware observes, “For about one-third of the country, water shortages are becoming reality and require rainwater harvesting designs to go beyond the novelty stage to be essential parts of the facility plumbing system.”

However, while interest is high, the manifestation of potable water harvesting systems remains low. “About 50 percent of the people I speak with are interested in potable systems, but only 10 to 25 percent actually install them because of cost,” remarks Leatherman. “The extra expense is usually due to the need for a larger storage vessel as well as the expense of filtration equipment.”

For the rain catchment industry, the future looks hopeful as Russell explains, “Twenty years ago you were sort of hobbling to get parts from other industries to make catchment systems. Now manufacturers see this as an emerging market.”

Source URL: https://www.metalarchitecture.com/articles/innovative-irrigation/