Optimizing Building Energy Performance: How doorways contribute to increased energy efficiency

by Jonathan McGaha | September 30, 2012 12:00 am

dominion1By now, everyone is familiar with the negative environmental implications of gas-guzzling cars, but less is made about the ill effects of energy leeching buildings. Studies show that buildings account for 40 percent of global energy use. If serious efforts are going to be made to reduce power consumption then improving the energy efficiency of buildings will have to be a top priority. As a critical component of any building’s envelope, doors and hardware should be among the tools used to optimize building energy performance.

 

The building energy use statistic noted above comes from a report-“Energy Efficiency in Buildings-A Global Economic Perspective”-by the World Business Council for Sustainable Development which also finds that the carbon emissions from buildings are substantially more than those in the transportation sector. Heating and cooling needs account for more than one-third of building energy use. This one area of energy consumption can be lowered by equipping buildings with frames, doors, hardware and specialized doorways that form an effective thermal barrier.

 

Thermal break frames

The most basic measure for improving energy efficiency entails the use of thermal break door frames. These specially designed frames are built to thwart metal’s natural heat transfer capabilities. In cold weather, thermal break frames reduce heat loss and prevent condensation or frost from forming on the frame’s interior portion. The barrier provides a positive thermal break within the frame profile, delivering maximum protection against cold penetration. Thermal break frames feature strategically placed barriers that prevent heat/cold transfer. A thermal break in the frame, filled with closed-cell polyethylene foam lowers its overall U-factor (or U-value).

 

U-factor is the measure of heat transmission from one side of an opening to the other. The lower the U-factor, the more effective the material is at preventing heat transmission.

 

Thermal break frames are only intended for openings that are exposed directly to the cold-thus are primarily used for exterior applications.

 

Insulated doors

Insulated doors can also improve building envelope thermal performance. Used on exterior openings in conjunction with thermal break frames and high-quality weatherstripping, these doors help minimize energy loss. The insulating properties of a door are usually expressed as the R-factor.

 

R-factor is the measure of a material’s ability to resist heat flow. The greater the resistance, or R-factor, the more effective a material’s insulating properties. A door with a high R-factor improves thermal performance making it ideal for use in the building envelope. The doors are constructed from sheet steel in 20- (standard duty), 18-, 16-, and 14-guage (extra heavy duty) thicknesses. The doors can also be reinforced with steel stiffeners for added strength. The core or interior space of the door can be filled with a variety of material including paper honeycomb, polystyrene or polyurethane. The thermal properties of a honeycomb core are poor and should not be seriously considered for envelope use. Cores made from injected foamed-in-place polyurethane perform the best in thermal resistance testing as it creates a solid barrier within the door without any empty spaces within the core that would allow thermal leakage.

 

Insulated doors can also be used on interior opening applications that require a temperature-controlled room, such as a computer server room.

 

dominion2Gasketing

Openings built with thermal break frames and insulated doors-or any type of frame and door-have small gaps and creases that must be filled to form a truly effective barrier against energy loss. Gasketing is needed to seal edges and prevent air from steadily seeping through these cracks.

 

These gaps are necessary to enable proper door operation, but also allow the passage of hot or cold air. Gasketing can fill gaps around the jambs and door head; a bottom seal can eliminate the gap under the door. Openings with a pair of doors also require gasketing to seal the meeting style.

 

Gasketing is made from materials such as, silicon, neoprene, vinyl and polypropylene. The materials are flexible and do not impede door operation.

 

Like insulated doors, gasketing is a necessity and interior applications that require temperature-controlled rooms. Gasketing is also routinely used on interior doorways for smoke control and to reduce sound transmission.

 

KERF Frames

Application of weatherstripping can be simplified with Kerf frames. These frames feature a grove that is constructed along the section of the frame that comes in contact with the edge of the door. The grove serves as a convenient channel to install weatherstripping without the use of additional fasteners.

 

The big picture

Reducing building energy consumption is an enormous challenge that will require closer attention to details. Although they are relatively small in the scope of an entire structure, doors, frames and hardware do play a role in improving building energy efficiency. Each opening component must be carefully chosen to ensure maximum energy savings are being achieved.

—

Rick Kincy is the director of sales for Houston-based Dominion Building Products. To learn more, visit www.dominionproducts.com[1].

Endnotes:
  1. www.dominionproducts.com: http://www.dominionproducts.com

Source URL: https://www.metalarchitecture.com/articles/know-your-products-optimizing-building-energy-performance/