by Jonathan McGaha | April 29, 2012 12:00 am
Property owners are increasingly well informed of the benefits of metal roofing. They are often specifically asking their builders, designers and architects for metal roofing. The benefits of durability, low weight, wind resistance and fire safety are often high on their list of criteria for their building’s roof systems. As a result, especially for new construction, specifying standing seam metal roofing systems has become almost commonplace. Each year, thousands of commercial, industrial, agricultural and residential buildings are constructed with longlasting vertical seam metal roofs.
As the benefits of metal roofing have become more widely known and specified, property owners in many cases have also started to inquire about metal roofing systems that have different looks than traditional vertical seam products. As a result, interest has grown in metal roofing systems that have shingle, shake, slate and tile looks. To provide additional variety and options, the manufacturers of these products have often led the way in terms of developing special patterned finishes, as well as energy-efficient coatings and installation methods providing even more options to property owners.
The installation process for most of these products is very similar. While there are variations from product to product, in most cases a starter strip is installed along the bottom eave edge of the roof, which allows the first course of shingles to be actively locked into place. This helps to provide uplift resistance as well as overall roof security. Next, additional perimeter trims are installed on the roof before installation of the field panels begins. Those perimeter trims include gable end trims, valley pans, roof to wall flashings, and even base trims around protrusions such as chimneys and skylights.
The roofing panels themselves usually install in a series of modular panels that interlock on all sides. Fasteners along the uphill edges of the panels are concealed by successive courses of the roofing panels. This helps to avoid exposed fasteners, which might obstruct the overall aesthetics of the systems. With some profiles, installation is over horizontal battens. Horizontal battens can increase the energy efficiency of the roofing system by allowing active ventilation directly beneath the roofing panels. Installation of these systems over battens involves exposed fasteners usually hidden in the butt edges of the roofing panels. The interlocking nature of these panels, combined with active fastening, creates roof systems that pass wind uplift requirements from Dade County, Texas Department of Insurance and others.
The valley systems on many of the shingle, slate and shake profile products are self-cleaning “open” valleys that can work very well on roofs that are subject to debris, such as tree leaves, pine needles, ice and snow. Some of the more heavily profiled tile designs utilize closed valley systems with redundant water-carrying methods to create weathertight roofing systems. With horizontal interlocks and thick buttlines on each course of roofing, these products usually require a minimum 3:12 roof pitch. In most cases, installation over solid decking is advised and these products’ low weight can encourage installation over existing roof shingles in retrofit applications. Roof installations are completed with hip and ridge caps, usually specially designed and fabricated to match the rest of the roofing system.
In addition to intricate stamping methods that create products with detailed and realistic texturing, special coatings are used to enhance the appearance of these systems. Earthtone and matte finish colors are often used. Recent developments in metal coating technology, though, have allowed for print coats that provide multi-colored patterns to enhance the slate, shingle, or shake appearance of certain products.
Most often, Kynar 500 or Hylar 5000 coatings are used on these systems, bringing them greater durability as well as color retention. Special textured and multi-hued powder versions of these coatings have started to enter the market with these products, providing an enhanced beauty option. In many cases, patterns from actual slate, shake or even shingle products can be duplicated. Many times these coatings employ reflective pigments to help keep heat outside of buildings and meet Energy Star requirements. On some products, aggregate or “stone” coatings are used. For property owners, these attractive finishes create a nice “bridge” from traditional shingles into metal roofing
While vertical seam metal roofing systems will enjoy continued specification well into the future, increased specification of specialty shapes, such as shingle, shake, slate and tile look products is expected. Manufacturers of these systems are happy to provide installation and specification details, as well as names of experienced installers, to ensure successful roofing system applications.
Todd Miller is president of Classic Metal Roofing Systems, Piqua, Ohio. For more information, visit www.classicmetalroofingsystems.com.
Source URL: https://www.metalarchitecture.com/articles/metal-roof-varieties/
Copyright ©2026 Metal Architecture unless otherwise noted.