Working on a LEED Project: Product management and workflow software help keep track of specifications

by Jonathan McGaha | September 30, 2012 12:00 am

By Paul Deffenbaugh

techIt’s no secret that LEED is a smashing success in the commercial new construction and retrofit markets. Launched by
USGBC[1] just 15 years ago, LEED has seen stunning growth. In 2005, LEED had a 2 percent market share of nonresidential construction, but today LEED is referenced in project specifications for 71 percent of projects valued at $50 million and over, according to McGraw Hill Construction.

 

Even with its success, the only consistent knock on LEED is that it’s difficult to navigate; the record keeping for the LEED certification application can easily become a full-time job for even mid-sized construction jobs. Plus, the LEED product-specification process has changed over time, growing more complicated, as it has transitioned from specification of “commodity products” to specification of either “branded products” or a detailed description of the green attributes that must be present. For example, you can’t just spec windows in a LEED project; you have to spec a certain brand of windows, down to the SKU level, so their multiple product attributes can be examined, including what they are made of, their SHGC, VT and U-value designations, and how and where the products were made.

 

Searching for Granularity

When specing products at the branded product level, a high degree of information granularity has to be available in the product record, and it is typically presented in a digital catalog entry. In the LEED system, all product attributes must be documented in multiple areas of the LEED credit templates, and within the final LEED certification application. What’s more, these product attributes-such as healthy products, energy and water efficiency in operation, sustainability, among others-must be backed by documentation, as required by USGBC for LEED certification. Given all that has to be tracked about hundreds or even thousands of products for any one job, the product attribute information is managed most efficiently by one of the truly helpful new product management software systems that have emerged from independent third parties to support the LEED product search and application processes.

 

Today’s LEED product-procurement personnel are becoming increasingly well-versed in the multiple product attributes that can be found through cross-referenced/cross-indexed searches in a wide range of workflow, catalog and search tools that are focused on LEED. In fact, once you set up a new project in a product management system, like GreenWizard[2], the software runs your team through the steps to achieve maximum LEED points around the products and thus certification, prompting you for missing information and allowing you to search using multiple parameters, such as third-party ratings, the manufacturing process’ carbon footprint, and even the shipping distance to the job site.

 

With LEED’s recent partnership with both the International Green Construction Code (IgCC) and ASHRAE, you will see a continued proliferation of complex and overlapping green building standards, and-correspondingly-the software solutions will respond with solutions to make the compliance process as efficient as possible. That said, don’t underestimate the complexity of LEED. Each of the LEED rating standards, and all of the various code adoptions in each jurisdiction, can have varying standards and data attribute requirements.

 

Without the right product attributes, you could lose a credit point, or even lose a full LEED credit category (and potentially slip a full LEED certification level) by not knowing certain product features. And those features can only be determined by looking at a wealth of data about specific brands and quantities, right down to the product SKU number. This is true not only for attributes of metal doors, finishes, and coatings, but it’s also true for other more-nuanced product attributes, such as embodied carbon or third-party certifications from groups like Green Seal, SCS or Cradle to Cradle.

 

Why focus on this seemingly extreme level of product attribute granularity in the specification process? Well, today’s building products often have widely diverging attributes, each of which have specific meanings within LEED. These attributes can result in LEED credits in one or more categories; the credits add up to certain totals that entitle your project to be LEED Platinum, Gold, Silver or cCertified. These product management software solutions can sort through the product’s attributes and parse out all the implications they will have on the LEED credits for that project.

 

LEED grows in complexity

To respond to LEED certification requirements, LEED has driven high levels of regimentation in the process of listing, searching for, specifying, modeling aggregate project attributes, and documentation. As LEED rackets up its specs even further (with the layering in of more-aggressive healthy, efficient and sustainable product requirements) the specification process runs the risk of becoming infinitely more complex, unless you use data-oriented product management software solutions to access digital information, and then choose and document your product selections. The top technology systems for managing the LEED credit and application processes are product management solutions (a.k.a. critical path management systems for building products) that include GreenWizard. In addition, there are workflow-only solutions, without any product information, like LoraxPRO and Greengrade.

 

With these product management and workflow solutions, which are all very affordable, you can model and analyze LEED credits, while automatically importing product attributes (in the case of GreenWizard), assembling all the proper documents for submittal, and in some cases even directly purchasing the product in question. When looking for a product management or workflow solution, always look for a LEED product management or workflow tool that is a LEED Automation partner, a.k.a. App Lab. That ensures that you can submit your LEED application online. The more sophisticated the LEED system becomes, the more prominent these software systems will become to help manage the process, help you optimize your LEED points–and ensure the shortest and least-expensive path to certification.

 

—

Adam Bernholz is founder and CEO of Mount Pleasant, S.C.-based GreenWizard, a cloud-based product management and project collaboration solution that simplifies building efficient, healthy and sustainable buildings. To learn move, visit www.greenwizard.com[3].

Endnotes:
  1. USGBC: http://www.usgbc.org
  2. GreenWizard: http://www.greenwizard.com
  3. www.greenwizard.com: http://www.GreenWizard.com

Source URL: https://www.metalarchitecture.com/articles/tech-notes-working-on-a-leed-project/