MCM Pricing Factors

by Jonathan McGaha | April 3, 2011 12:00 am

Metal Composite Material, or MCM, has become the go-to product for designers where complex geometry is required to fill in the gaps between other materials. The growth of the product applications has grown tremendously over the last 20 years. Metal Architecture has asked me to start a column that specifically deals with all of the aspects of this great product.

My intention is to write very short articles that explore a specific aspect of MCM in each issue of Metal Architecture. The first will be on “Parameters that Affect Pricing in MCM.” The second will be “How Can You Assure You Get a Great Fabricator.” I look forward to establishing a dialogue with you about MCM.

Parameters that Affect Pricing in MCM

Panel Size
On an average size project, the parameter that has the most affect on pricing is panel size. It really is a simple concept; it takes about the same amount of fabrication time to make a small panel as it does to make a large panel. Let us look at an example:

Say we want to cover 100 square feet of a building:
Panel Size: 2 feet by 2 feet 5 feet by 10 feet
Panels Required: 25 panels 2 panels
Fabrication: 2 man hours per panel 2 man hours per panel
Man hours for 100 square feet: 50 man hours 4 man hours
Cost per man hour: $20 $20
Cost to fabricate: $1,000 $80
Fabrication cost per square foot: $10 per square foot $0.80 per square foot

In addition to the fabrication time, you will also require more extrusions, sealant and several other items because the length of perimeter around all of the panels is much higher with 25 panels versus two. So the installation cost differential will be even higher.

While this is a simple example, the concept is clear. If you are concerned about cost, use larger panels.

ted_small panelsted_large panels

Left to right: Small panels at Sentara Obici Hospital, Suffolk, Va., and large panels at Embry Riddle, Daytona Beach, Fla.

Ted S. Miller is the president of The Miller-Clapperton Partnership Inc., Austell, Ga. For more information, visit www.millerclapperton.com[1].

Endnotes:
  1. www.millerclapperton.com: http://www.millerclapperton.com

Source URL: https://www.metalarchitecture.com/articles/teds-corner_apr11/