by Jonathan McGaha | June 5, 2012 12:00 am
Flatness could have been chosen as the first reason why MCM panel systems have become so popular. When it comes to large, monolithic surfaces on building walls; MCM panel systems have no peer. This is no accident; these panel systems are designed to be that flat.
First of all, the metal sheets themselves are selected and processed, with stretcher leveling and other techniques, specifically to make the sheets as flat as possible.
The continuous process by which the MCM sheets are produced is centered on making the sheets flat and remaining flat. They are produced under a tightly controlled combination of heat, pressure and tension.
The thermoplastic core is extruded in a molten state, through a die, in order to maintain tight controls on the thickness of the material, which is an important component of the eventual flatness of the sheet.
The extruded core is bonded to the sheets under pressure that is controlled to a close tolerance to further ensure the structural integrity of the sheets as well as maintain the surface flatness.
The front and rear sheets of metal are held in tension throughout the production process in tension so that the sheets are at a steady state across the sheets to ensure the MCM sheets are as flat as possible. 
MCM sheets are typically formed with computer controlled machining centers that utilize high-speed cutting devices. This type of fabrication does not induce “cold working” into the material unlike the shearing and folding that is used with solid metals. This fabrication method therefore further ensures that the very flat MCM sheets will be formed into very flat MCM panels.
In addition, when necessary for structural deflection requirements, fabricators have developed stiffener systems that do not induce further stresses into the panel systems to maintain the flatness.
The projects featured demonstrate the flatness offered by MCM panel systems and these projects demonstrate visually one of the reasons MCM panel systems have become so popular.
As we explore these benefits, please feel free to drop me an email at: ted.miller@millerclapperton.com to remind me of others.
Ted S. Miller is the CEO of The Miller Clapperton Partnership Inc., Austell, Ga. For more information, visit www.millerclapperton.com[1].
Source URL: https://www.metalarchitecture.com/articles/teds-mcm-corner-part-6-flatness/
Copyright ©2026 Metal Architecture unless otherwise noted.