Doors: Rolling, Bifold and Walkthrough – May 2016

Clopay Building Products

Clopay Building Products’ Model 3724 2-inch polyurethane insulated 24-gauge overhead sectional steel door is a three-layer steel sandwich door. The steel doors have a continuous thermal break and 18.4 R-value. They are available in heights from 6 feet, 3 inches to 24 feet and widths from 9 feet, 2 inches to 32 feet, 2 inches long. Five colors are offered: white, brown, tan, gray and Trinar white. Additionally, a 32-inch by 80- inch pedestrian pass door is available.

www.clopaydoor.com[1]

Para-Port Door LLC

Para-Port Doors can cover door openings 145 feet wide and 50 feet high. They have wind load ratings to 120 mph and can be stopped at any point when opening for heat retention. Para-Port Doors may be installed in renovation and new construction projects in all climates and do not freeze closed in cold climates.

www.paraportdoor.com[2]

BETCO Inc.

BETCO’s roll-up self storage doors for industrial, self storage and residential applications are made of rollformed galvanized steel to provide high wind-strength resistance and minimum flex. The roll-up doors have a 10-year door springs warranty. They are available in a variety of durable paint colors with a 40-year film integrity warranty and 30-year chalking and fading warranty.

www.steelrollupdoors.com[3]

Erect-A-Tube Inc.

Erect-A-Tube’s Endwall Door System is designed to replace a building’s main frame. The bifold door hinges will match the pre-located truss hinges for installation. The bifold doors may be produced to 80 feet wide with 20-foot clear height. Endwall Door System is offered with the bifold door, end-wall and steel building package.

www.erect-a-tube.com[4]

Hi-Fold Door Corp.

Hi-Fold Door’s doors feature auxiliary arms for high opening clearance, low mount points and a double-strength center hinge designed to eliminate sagging. The pre-assembled doors have a welded steel frame and trusses. Open doors provide canopies to protect against sun and rain. A jamb latch and bottom seal secure the doors when closed. Optional walkthrough doors, windows and remote operation are available.

www.hi-fold.com[5]

Schweiss Doors

Schweiss Doors’ one-piece, bifold doors feature fast moving lift straps and wrap-around hinges with grease zerks. The custom-sized doors have Red Power Hydraulic Pumps, large cylinders and spherical bearings. Cable doors may be retrofitted with Schweiss Doors’ lift straps.

www.bifold.com[6]

DBCI

DBCI Curl-Lok sheet door panels feature an interlocking design. The panels are rolled into place without machinery or special tooling. Curl- Lok panels are designed so if they are damaged, individual panels may be replaced, avoiding the need to replace the entire door.

www.dbci.com[7]

PDL Building Products

PDL Building Products’ preassembled door systems feature standard 18-gauge leafs, adjustable aluminum channels and commercial grade components. Set screws in the hinge reinforcements allow the doors to be adjusted on job sites. Optional 16-gauge leafs are available.

www.pdlbuildingproducts.com[8]