Metal Soffit Panels – December 2020

by Christopher Brinckerhoff | December 1, 2020 12:00 am

Metal soffit panels featured in Metal Architecture’s December 2020 issue.

Berridge Manufacturing Co.

Berridge’s Vee-Panel is used for soffits, walls, ceilings, fascia and other applications. It comes in 24- and 22-gauge steel and there is a vented option. The concealed fastener panel has 12 3/4-inch coverage. It is available in 34 colors and finishes including smooth and wood grain embossed.

www.berridge.com/products/fascia-wall-and-soffit-panels/vee-panel [1]

Firestone Building Products Co. Inc.

Firestone Building Products’ UC-500 metal panels for soffits and fascia applications can create a flush or flat appearance with an interlocking leg and concealed fastening system. It comes in a solid or vented pattern. Vented options include two rows of three vents or one row of three vents down the center. Pencil or flat stiffening ribs are available for aesthetics and to lessen oil canning. Materials and finishes include Kynar-coated galvanized steel, Galvalume steel and aluminum, anodized aluminum, copper and zinc.

www.firestonebpco.com/us-en/roofing/metal-roofing-systems/soffits [2]

McElroy Metal

McElroy Metal’s Marquee-Lok and Marquee II concealed fastener metal soffit and fascia panels have a locking design that adds strength and helps prevent unlatching due to high wind. They are 12 inches wide, 1 inch high, and come in lengths to 8 feet. Marquee-Lok and Marquee II panels can be vented or non-vented and are produced in standard 22-gauge Galvalume or optional 24-gauge Galvalume.

www.mcelroymetal.com [3]

Morin Corp.

Morin’s Primo soffit panels can be ribbed, vented or plain flat panels. They are attached with concealed fasteners and are 1-inch deep and 12 inches wide. Primo soffit panels are rollformed to custom lengths. The panels are produced in 0.032-inch-thick aluminum, 22- and 24-gauge Galvalume, and 8-mm-thick zinc.

www.morincorp.com [4]

Petersen Aluminum Corp.

Petersen’s PAC-750 metal soffit panels are offered solid and ventilated. They are rollformed with 0.032-inch-thick aluminum to lengths to 25 feet. PAC-750 metal soffit panels are 12 inches wide with a V-groove every 6 inches.

www.pac-clad.com/products/soffit-panels/pac-750-soffit [5]

Source URL: https://www.metalarchitecture.com/products/metal-soffit-panels-december-2020/

---