Metal Wall Panels – May 2020

by Christopher Brinckerhoff | May 1, 2020 12:00 am

Metal wall panels featured in Metal Architecture’s May 2020 issue.

CENTRIA

CENTRIA offers its Versawall insulated metal panels (IMPs) in a new finish: non-embossed. Versawall IMPs with a smooth, non-embossed finish come in two panel profiles: Flat and Planked. Versawall IMPs are also available with an embossed finish in three panel profiles: Flat, Planked and Striated. The panels have a galvanized steel face and liner with preformed joinery, and thick, rigid, hydrochlorofluorocarbon (HCFC)-free foam insulation.

www.centria.com/products/insulated-metal-panels/industrial-commercial-insulated-metal-panels/versawall–versapanel/versawall [1]

Fabral Inc.

Fabral’s Silhouette HCF Series panels are a horizontal concealed fastener system. Panels come with one to four ribs and in multiple profiles. Interlocking side-laps hide fasteners and are installed with or without clips to allow thermal movement. The 12- or 16-inch-wide panels come in lengths to 30 feet. Maximum purlin spacing is 4 feet on-center. The panels have a 200-foot minimum radius for field curving.

fabral.com/architectural/panel-systems/concealed-fastener-walls/silhouette-hcf-series [2]

McElroy Metal

McElroy’s Mega-Rib wall panels are 7.2 exposed fastener panels. The ribbed panels are installed horizontally or vertically. They are produced in standard 24-gauge Galvalume and 22-gauge Galvalume by request. Mega-Rib panels come in Sherwin-Williams Coil Coatings’ Fluropon PVDF colors.

www.mcelroymetal.com [3]

Nu-Ray Metal Products Inc.

Nu-Ray Metals’ NRM-8000 series is a concealed fastener wall and soffit system with a flush appearance. Panels are 12 inches wide and 1 1/2 inches deep, available in lengths to 45 feet. There are 13 profiles that can be combined. They have a variety of reveals, pencil ribs and perforations. NRM-8000 panels are produced in 18- to 26-gauge steel, and 0.031-, 0.04- and 0.05-inch-thick aluminum. Multiple finishes, standard and metallic colors are offered.

www.nuraymetals.com [4]

Overly Manufacturing Co.

Overly’s DIMENSION XP metal panels are interlocking dry joint, concealed fastener panels used on walls, soffits and ceilings. They are used in back-ventilated rainscreens and barrier wall construction. Panels come in three depths: 1 1/2, 2 1/4 and 3 inches. They are produce in aluminum, copper, stainless steel and zinc. Multiple finishes are offered as well.

mfg.overly.com/products/dimension-xp [5]

Source URL: https://www.metalarchitecture.com/products/metal-wall-panels-may-2020/

---