Metal wall panels featured in Metal Architecture’s May 2020 issue.
CENTRIA
CENTRIA offers its Versawall insulated metal panels (IMPs) in a new finish: non-embossed. Versawall IMPs with a smooth, non-embossed finish come in two panel profiles: Flat and Planked. Versawall IMPs are also available with an embossed finish in three panel profiles: Flat, Planked and Striated. The panels have a galvanized steel face and liner with preformed joinery, and thick, rigid, hydrochlorofluorocarbon (HCFC)-free foam insulation.
Fabral Inc.
Fabral’s Silhouette HCF Series panels are a horizontal concealed fastener system. Panels come with one to four ribs and in multiple profiles. Interlocking side-laps hide fasteners and are installed with or without clips to allow thermal movement. The 12- or 16-inch-wide panels come in lengths to 30 feet. Maximum purlin spacing is 4 feet on-center. The panels have a 200-foot minimum radius for field curving.
fabral.com/architectural/panel-systems/concealed-fastener-walls/silhouette-hcf-series
McElroy Metal
McElroy’s Mega-Rib wall panels are 7.2 exposed fastener panels. The ribbed panels are installed horizontally or vertically. They are produced in standard 24-gauge Galvalume and 22-gauge Galvalume by request. Mega-Rib panels come in Sherwin-Williams Coil Coatings’ Fluropon PVDF colors.
Nu-Ray Metal Products Inc.
Nu-Ray Metals’ NRM-8000 series is a concealed fastener wall and soffit system with a flush appearance. Panels are 12 inches wide and 1 1/2 inches deep, available in lengths to 45 feet. There are 13 profiles that can be combined. They have a variety of reveals, pencil ribs and perforations. NRM-8000 panels are produced in 18- to 26-gauge steel, and 0.031-, 0.04- and 0.05-inch-thick aluminum. Multiple finishes, standard and metallic colors are offered.
Overly Manufacturing Co.
Overly’s DIMENSION XP metal panels are interlocking dry joint, concealed fastener panels used on walls, soffits and ceilings. They are used in back-ventilated rainscreens and barrier wall construction. Panels come in three depths: 1 1/2, 2 1/4 and 3 inches. They are produce in aluminum, copper, stainless steel and zinc. Multiple finishes are offered as well.
