Columns

How Color and Quantity Affect MCM Pricing

This month we are going to look at two parameters that often are interrelated: Color and Pricing. There are really no surprises here; the more you buy the less it costs. That is the case at least for unit price cost. The price between 1,000 square feet and 25,000 square feet of standard color MCM… Continue reading How Color and Quantity Affect MCM Pricing

This month we are going to look at two parameters that often are interrelated: Color and Pricing.

There are really no surprises here; the more you buy the less it costs. That is the case at least for unit price cost. The price between 1,000 square feet and 25,000 square feet of standard color MCM can be 10 to 15 percent for the MCM sheet. The real bump in price occurs if you choose a small quantity of custom color MCM. This is due to two reasons:

  • Normal differential in unit price because of the economy of scale between small quantity and large quantity.
  • Because MCM sheets are coil coated the cost to run a small quantity of custom color through a coil coater is extremely high. These paint application machines are designed to make long runs and when you have to make a change in color for a small quantity you have to change coils, clean the old paint out, put the new paint in and usually waste a lot of aluminum coil tweaking the new run for quality control.

The table below gives a basic look at the relationships between color and quantity:

June-color and quantity

From this table it is obvious that large quantities provide the best pricing. It is also interesting to note that the cost for a standard color and custom color is basically the same for a large quantity.

The cost differential for a small quantity of standard color is minor because manufacturers often have stock amounts of standard color material. Therefore, to get the best bang for the buck for small quantity projects you should choose one of the manufacturer’s standard colors.

Also, if for some reason, you have theneed for an addition to the project in the future, a standard color will be much easier and more economical to obtain.

Ted S. Miller is the president of The Miller Clapperton Partnership Inc., Austell, Ga. For more information, visit www.millerclapperton.com.