Geico Garage, Amway Center, Orlando, Fla.
Serving Amway Center, home to the Orlando Magic basketball team, the Geico Garage makes a design statement. Named for its auto insurance sponsor, the 1,875-car garage is gaining notice as much for the beauty of its metal as its function.
Wrapped in a combination of perforated and metal mesh from Tampa, Fla.-based McNICHOLS Co., the eight-level garage contains some of the same metal design features of the Amway Center, an intentional plan to visually connect the two structures, says architect Bill Walker with C.T. Hsu + Associates, Orlando.
Linking the metal design elements in the parking garage with the sports arena was a natural step for the architect, who served as the associate architect on the Amway Center. The overriding concept-and design tie-in-was to give the impression of one piece of steel ingot, which was articulated through using metal elements. The long, horizontal windows are there to relate to the automobile traffic, Walker says.
Unique to the garage is a set of folding “elephant” doors on the ground floor that open vertically in a bi-fold fashion to accommodate transport trucks and buses serving event productions at the sports center. The doors are paneled with the McNICHOLS perforated metal panels to match the private parking area at the Amway Center where Orlando Magic players park.
Orlando-based Atlantic Steel Inc., custom fabricated the McNICHOLS perforated metal panels, with 1-inch (25-mm) perf-free borders, and installed them into the giant doors. The structural and miscellaneous steel and aluminum fabrication company also applied the metal skin throughout the garage.
“We actually installed the perforated aluminum panels directly onto the roll door system on site,” says Eric Johnson of Atlantic Steel. The two doors measure approximately 43 by 19 feet and 31 by 19 feet and are comprised of 140 perforated panels of 1/8-inch-thick aluminum. Two hole patterns were used and carefully designed to look random-one with a 0.5-inch-hole pattern staggered at 0.697 inches with 48 percent open area, the other with a 1-inch-hole pattern staggered at 1.25 inches with 58 percent open area.
C.T. Hsu’s design called for several types of metal cladding throughout the garage as “part of the overall design plan to break up the massing and make a more attractive building,” Walker says. The mix of specialty metal satisfied the desire of the city of Orlando and the Orlando Magic to maintain the transparent look, yet obscure the parked vehicles from sight. The perforated metal also helped provide the appropriate ventilation.
Two exterior staircases on the garage’s southwest and northeast corners project a certain style all their own. Created in a vertical zigzag pattern topped by an angular overhang, the staircase is accented with infill panels, creating a tower-like element similar to the iconic wire mesh tower icon on the Amway Center.
Using McNICHOLS perforated infill panels, the architect satisfied safety and aesthetic requirements. “The material is relatively transparent, in an effort to prevent someone from hiding behind it,” Walker says.
The base of the staircase and the openings along the garage’s street level are enclosed in McNICHOLS wire mesh with 2-inch openings, providing another safety precaution for those parking for events at the center. For protection and aesthetics, the perforated metal and wire mesh materials are powder-coated in shades of silver and grey to retain the metal look.
The Geico Garage also has a glass-enclosed staircase that features infill panels of anther variety of McNICHOLS metal-0.250-inch diameter aluminum wire mesh, with 2-inch square openings. Designed with a lock crimp weave to prevent the wire from shifting, the mesh is mounted inside an inner-frame that is bolted to an outer frame that is secured into the building structure. Together, with its companion parking garage, this new sports center is fast becoming a memorable image on Orlando’s skyline comprised of two urban structures with intriguing design linked by striking metal features.
McNICHOLS Co., www.mcnichols.com

U.S. Land Port of Entry, Champlain, NY.
When entering the United States in Champlain, the first thing travelers see is a stunning etched metal fabric from Cambridge, Md.-based Cambridge Architectural. Two different Cambridge mesh systems lend aesthetic appeal and functionality to the U.S. Land Port of Entry’s primary inspection booths and two processing facilities.
Located at the intersection of Canada’s Highway 15 and U.S. Interstate 87, the Champlain Port of Entry is one of the northern border’s busiest crossings. The 100-acre site consists of five buildings linked by roads and inspection plazas, all built to increase the capacity of passenger and commercial vehicle inspection and processing.
A 10-lane-wide expanse of metal fabric placed directly above the primary inspection booths and etched with the words “United States of America” is the centerpiece of Cambridge’s contribution to the Port of Entry. The impressive signage, a Cambridge MeshFX system, provides a unique and modern visual touchpoint upon entering the country.
“A slight rise in the roadway contributes to the dynamic unfolding of both words and horizon as visitors slow for inspection,” says Henry Smith-Miller, design partner and architect with Smith-Miller + Hawkinson Architects LLP, New York City. “The sign’s transparency and its purposeful openness allude to the ideas of an open and democratic society founded in an Arcadian landscape.”
The Port’s Commercial Processing Facility, which inspects and processes 1,400 trucks each day, is located next to the primary inspection booths. The facility utilizes a Cambridge Solucent shading system to screen harsh sunlight entering the south side of the building without obstructing views from the interior. Additionally, for privacy purposes, the mesh is opaque when viewed from the exterior. The inherent open-yet-closed nature of Cambridge’s woven metal fabric makes all of this possible, playing on the angles at which it is viewed.
Another Cambridge MeshFX system etches the word “Champlain” on the Port’s two-story cargo processing facility, adding a nice touch of branding to the otherwise utilitarian warehouse. For this project, Cambridge worked with the architect to develop an ideal system to address all the visual and functional needs of the site. Each system was then specifically engineered to each exterior to assure a streamlined installation.
“We worked closely with Cambridge to determine, via full-size mock-ups, the ideal products for the project’s different signs, and to make sure that every component performed according to our design drawings and specification,” says Smith-Miller. “Cambridge was willing to experiment and did a first-rate job of engineering, manufacturing and installing the products, delivering everything on schedule. The end result is spectacular.”
The MeshFX signage above the primary inspection booths and the Solucent system on the Commercial Processing Facility were fabricated with mesh in Cambridge’s Graph pattern, which features rigid, open weaves, and was installed using Cambridge’s U-frame attachment hardware. On the cargo processing facility, the MeshFX signage was fabricated with mesh in Cambridge’s Shade pattern, which features large-scaled, flexible open weaves, and was installed with Cambridge’s Scroll tension attachment hardware.
Completed in March 2010, Northland Associates Inc., Liverpool, N.Y., was the general contractor.
Cambridge Architectural, www.cambridgearchitectural.com
DDC Domus Design Collection/ Minotti on Madison Avenue, New York City
Inspired by the New Museum of Contemporary Art in New York, the showroom at DDC Domus Design Collection/Minotti on Madison Avenue features a custom ceiling designed, engineered and manufactured by Birmingham, Ala.-based AMICO.
When entering the store, the three-dimensional profile of the expanded aluminum mesh creates an illusion of a solid, textured ceiling and, when exiting, an open mesh feel. Additionally, the ceiling system was powder coated to a high gloss black finish, which gives the feeling of movement.
AMICO was commissioned to work with the owner, Milan, Italy-based architect firm Dordoni Architetti and New York-based Corporate Interiors Contracting Inc., the general contractor, to create a ceiling system using their APEX01A expanded aluminum mesh. After a couple rounds of design, the final system was selected and production of the ceiling began. The framework is made up of aluminum I-Beams. The expanded aluminum mesh is attached to the I-Beams using AMICO’s APEX ceiling clips.
AMICO, www.amicoarch.com
Metro Transit Parking Ramp, Minneapolis
The parking ramp features 17,400 square feet of Lancaster, Pa.-based Fabral’s Deep Rib IV metal panels that were custom anodized. The vertical metal siding was hung over horizontal stainless furrings with custom embeds by Maplewood, Minn.-based M.G. McGrath.
For security reasons, the panels were designed to be see-through. Since the parking garage is frequented in the evening and night, a panel system was requested that would allow security to see through the façade. The spans were stretched to the limits of corrugated metal panels so Fabral’s Deep Rib IV was a perfect fit. After installation, crews anodized the panels to insure that no corrosion would occur.
Julie Snow Architects, Minneapolis, was the architect, and Adolfson & Peterson, Minneapolis, was the general contractor.
Fabral, www.fabral.com

United Union Building, Washington, D.C.
Completed in February, the project includes a layered, two-story feature wall along a staircase that showcases perforated metals in an unorthodox way. The first layer includes perforations in three different sizes, while a second layer of corrugated perforated metal uses 0.5-inch diameter holes. The third layer of material is wall-mounted glass that increases the visual depth of the assembly. The three patterns in the 18-gauge steel are 0.313-inch diameter by 0.375-inch on-center and 63.18 percent open; 0.157-inch diameter by 0.188-inch on-center and 63.37 percent open; and 0.500-inch diameter by 0.625-inch on-center and 58 percent open.
Carbondale, Pa.-based Hendrick Architectural Products supplied the perforated metal for the project. Benedict Metal Works, Upper Marlboro, Md., was the metal fabricator.
“The combination of various colored, die-cut metals and exquisite attention to detail create an ever-changing moiré effect,” notes architect Anik Jhaveri with Washington, D.C.-based Mancini Duffy Architecture. Jhaveri also says that the design is meant to remind visitors of the workmanship of the trades that achieves the level of art-a fitting concept for the building’s occupant.
Hendrick Architectural Products, www.hendrickarchproducts.com


