The Millsboro Waste Water Treatment Plant in Millsboro, Del., isn’t your typical treatment facility. The facility has the first tubular membrane wastewater treatment on the Delmarva Peninsula and is the largest air-lift tubular membrane wastewater treatment process in the Western Hemisphere. Civil engineer Cabe Associates Inc., Dover, Del., was recognized for creating this innovative facility with the 2010 Grand Conceptor Award given by the Delaware Chapter of the American Council of Engineering Companies.
Cabe Associates brought in architectural firm French & Ryan Inc., Georgetown, Del., to assist with the façade plan for two plant buildings. The firm consulted for a main facility, the membrane building, and a secondary structure, the headworks building. Because the plant sits on a well-traveled road that is near a residential area, French & Ryan wanted a durable and attractive façade system that could perform in the high-wind region. The firm also was looking for a single-source manufacturer.
French & Ryan turned to ATAS International Inc., Allentown, Pa., for metal roofing, coping, snow guards, gutters and soffit, as well as vertical wall panels. The membrane building has a 24-guage Field-Lok (FLM165) metal roof in Hartford Green. Approximately 500 square feet (46 m2) of 0.032-aluminum Wind-Lok in Hartford Green was used for the soffit. This building also features: 24-gauge Rapid-Lok Coping in Hartford Green, S-5! Snow Retention System, 0.040-aluminum 7-inch (178-mm) Box Gutter in Hartford Green, and 0.032-aluminum downspouts and gutter accessories in Hartford Green. The S-5! Snow Retention System is manufactured by S-5! Attachment Solutions, Colorado Springs, Colo. The 24-gauge steel Field-Lok panels also were incorporated into the headworks building but not as a roof system. This building has a flat non-metal roof, so Field-Lok was installed as a vertical wall panel over the upper portion of the wall façade. The panels have a Hartford Green finish to mesh with the plant’s color scheme.
“Metal meets the aesthetic requirement, by adding an attractive roof to the highly visible building,” said Pat Ryan, AIA, P.P., principal of French & Ryan. “It also gave us design flexibility and options when meeting town requirements, including selecting a color that blends with the area and choosing a material that performs.” Ryan added that ATAS was selected because it manufactures quality products, as well as offers technical expertise and support.
The builder was Bearing Construction, Dover, Del.; the installer was Maintenance Tech, New Castle, Del.; and the distributor was Universal Supply Co., Hammonton, N.J.
ATAS International Inc., www.atas.com
S-5! Attachment Solutions, www.s-5.com


