Columns

What’s old is new again

While new materials and methods are being invented at an ever-increasing pace, the focus here is not on invention, but on the innovative uses of existing materials. Metal, and more specifically expanded metals, have been used in construction since their discovery or development. Today however with a more focused emphasis on sustainability and building green… Continue reading What’s old is new again

While new materials and methods are being invented at an ever-increasing pace, the focus here is not on invention, but on the innovative uses of existing materials.

Metal, and more specifically expanded metals, have been used in construction since their discovery or development. Today however with a more focused emphasis on sustainability and building green buildings, the use of these products has come into much wider spread use. “Sustainable” and “green” are frequently used terms and are widely agreed as desirable objectives of any project, but how “green” is “green”?

The U.S. Green Building Council’s LEED program has become “the” criteria for sustainability largely because of the open and transparent manner in which the guidelines are established. The technical criteria is proposed by USGBC members and is publicly reviewed for approval by the membership. These green building guidelines are in five principal categories: Sustainable Sites, Water Efficiency, Energy and Atmosphere, Materials and Resources, and Indoor Environmental Quality. In this article, the focus is on Materials and Resources.

Recycled Content

One to two credits can be awarded in this category. To be granted one credit, the project must contain at least 10 percent recycled content. With the increasing number of products on the market today that contain recycled materials, the 20 percent threshold for two points is more easily achieved in many projects.

Steel is one of the most recycled products in the world. With the advent of many EAF (electric arc furnace) mills or mini-mills whose principal raw material is scrap steel, the recycled content of any new steel building material is likely to be much higher than just 10 years ago. This goes for beams and trusses, studs and purlins, roofing and siding, HVAC, ceilings and decorative touches made from metals. Old cars have now become your new decorative ceiling or the new awning over your entrance.

Expanded metals have gained favor for a wide array of architectural uses. Historically, the product has been used under wallboard to provide security in government offices, banks, pharmacies and other facilities that needed a higher level of protection. Today, it has come out from behind the gypsum and is the wall panel itself.

Expanded steel wall panels are both decorative and functional. For example, room dividers and partitions are now manufactured from coated steels, aluminum and copper based products. Because expanded metal allows for the flow of light and air, it is well suited for areas where divisions are needed but a solid wall is not acceptable.

Ceiling tiles of expanded metal are both decorative and functional. The product can be combined with regular acoustical tiles where necessary and provide a unique “look.” The tiles can also be installed in the same grid pattern for regular tiles or can be a part of an engineered ceiling to take advantage of all the attributes offered.

Because of the manufacturing method, wherein the expanded metal has more rigidity than the sheet from which it was formed, this product also has applications that otherwise could require a complete fabrication to achieve without it.

Copper, aluminum and steel are all widely recycled. Long before it became “socially” correct, aluminum beverage cans were being recycled for economic reasons. The same is true of copper-it just made economic sense to recapture the metal units versus mining for new ore. Again, because of the mini-mills, this is also now the case in carbon steel. The “greening” of the world is clearly socially the norm, but it also makes good economic sense. All of these products in use as expanded metals make sense for the same reasons. Their use in expanded metal applications on a new building or retrofit is definitely able to assist in meeting the “recycled content” credit (NC v2.2 MRc4) for your LEED certification.

Regional Materials

Again, in this category, one to two credits can be earned dependent upon the percentage of regional materials. According to the USGBC, “Regional materials are those that are extracted, harvested and manufactured within 500 miles, as the crow flies, of the project site.”

Most of the U.S., excluding some parts of the West, is within this 500-mile radius from a steel producer. The same is also true of expanded metal producers. From the Southeast to the Pacific Northwest and most locales in the Midwest, there is an expanded metal manufacturer within the required 500 miles in most of the lower 48.

Conclusion

Green or sustainable buildings are kinder to the environment and provide healthy, comfortable, and more productive workspaces. They use valuable resources such as energy, water, materials and land more efficiently than buildings that are simply built to code. This issue of green building will only continue to grow in importance, whether because of regulations, the cost of energy, the impact of construction on the habitat of an endangered species, or numerous other issues. LEED encourages a whole building approach over a building’s life cycle that guides a collaborative and integrated design and construction process. Designing with metals, including expanded metals, can contribute significantly to accomplishment of these goals.

Rick Bahner is one of the owners of Oklahoma City-based Expanded Solutions LLC, which has been producing quality expanded metals since 1964. Bahner is also a former chairman of the Expanded Metal Manufacturing Association.

Expanded Metal Manufacturers Association is a division of the Chicago-area based trade association,
the National Association of Architectural Metal Manufacturers. The member companies of
EMMA are Alabama Metal Industries Corp., Exmet Industries Inc., Expanded Solutions LLC, Fisher &
Ludlow, New Metals Inc. and Spantek Expanded Metal. To learn more about EMMA and its members
visit www.emma-assoc.org.

guest_column