Richard Youngblood and his team at Youngblood Architecture in Las Vegas began a project with Audi back in spring 2008. The project, a new dealership facility, mimics the sleek design of the Audi automobile line and features floor-to-ceiling glass walls that allow ample natural lighting and an exterior wrapped in metal paneling. The dealership, located in Henderson, Nev., was one of the first to be completed as part of Audi of America’s plan to develop new Audi dealerships that embrace efficiency while maintaining sporty, luxurious architecture. Audi of America sets standards for all of its dealerships so that they look uniform across the nation. The finished building is a 24,000-square-foot, two-level structure including a showroom, offices, and service garage and part storage area.
When Youngblood Architecture was chosen to work with the Audi Design Team to create the new dealership showroom format, they were tasked with developing the first “Terminal” style showroom that would replace the previous standard of the “Hangar” design. The “Terminal” dealership design for Audi of America is challenging in its form and highly detailed in its planning.
The terminal design mimics a racetrack-a nod to Audi’s motor sports roots-the back wall of each showroom is meant to represent the banked, high-speed turns found on a racetrack. The banked turn slopes down to the floor and turns horizontally as well. According to Youngblood, president of Youngblood Architecture, Building Information Modeling (BIM) software-specifically ArchiCAD-made it possible to model the complex shapes and double-axis radius walls. The Terminal Style features a series of curved interior walls and an exterior clad with aluminum composite panels (ACM). The building has angled window jams. The angle is an extension of the curved walls inside the building.
While the complexity of this track shape with the double axis radius walls presented a challenge to Youngblood, the firm was able to create the BIM model, document the walls and provide 2-D and 3-D drawings to the contractor with no change orders.
Youngblood says the software made all the difference.
“We had originally begun this project using [one software],” explains Youngblood. “We were about 30 percent of the way into the job when we realized that the software wouldn’t really be enough to do the job. There was no way to document the curved wall and see how it worked with the structure. That’s when we decided to look for alternative options and found ArchiCAD.”
The BIM model created in GRAPHISOFT ArchiCAD software allowed his team to document the curved walls as well as the entire building. Once they switched, they noticed calculation errors in the original [software] drawings. The new BIM model revealed that the curved wall, because of its tie in to the second floor and the roof, would have had structural steel for the roof deck and floor deck penetrating the interior skin of the building.
“That discovery alone saved us a great deal of embarrassment and time in going about fixing a simple mistake,” says Youngblood. “The standard method of documentation that we had been using in [the original software] had overlooked the conflicts posed by the complex wall shapes and the structural frame. If not found in the BIM model, we would have had the steel plowing right through the wall.”
While the switch to ArchiCAD added an extra element of work to the job, Youngblood says he feels it was the right move. The team used ArchiCAD to the fullest, providing the contractor with the standard drawings as well as a video rendering all from the BIM model. The firm has never used another type of BIM software since and is currently using ArchiCAD 15.
Youngblood Architecture was able to work with Audi’s designers to fine tune initial details for future Audi Terminals. The 3-D aspect of modeling the metal skin was easily shown and the views provided an opportunity for the Audi creative team to finalize the prototype design for all terminals and give them that Audi “look.”
The firm continues to work with Audi of America on their dealership projects. Youngblood Architecture is currently creating the model in ArchiCAD for a second terminal style showroom in Reno, Nev.
—
Mary Moscarello is a writer with more than a decade of broadcast and print journalism experience. As editor of the BIM Engine Blog by Graphisoft, Mary writes about an array of architecture techniques, projects and industry trends. The BIM Engine Blog profiles architects and how they used ArchiCAD to successfully complete projects around the world, at blog.graphisoftus.com.
**Photos courtesy of Youngblood Architecture


